New type of non-calcined inorganic board

Production process:

Adopting high purity ceramic fiber wool as raw material, the environmentally friendly production equipment developed by the self-developed assembly line for one-time molding, with the patented formula, without the need for the second calcination, can be molded into high-quality inorganic panels.

Characteristics:

The new inorganic ceramic fiber board contains very low organic matter, no smoke, no smell, strength and hardness increase instead of decreasing in case of open fire, high temperature and high heat.

The use of new equipment, production processes and formulas make the new inorganic ceramic fiber board size is more accurate, the surface is more delicate and flat, the slag ball content is very low, low thermal conductivity, thermal contraction is very small, can be used according to the needs of carving and cutting into the appropriate size, and can be done to make perforation, cutting and other treatments, is the wall-hung stoves, electric stoves, ovens and other ideal environmentally friendly high-temperature heat-resistant insulation board.

Product application:

Metallurgy, petrochemicals, glass, ceramics, non-ferrous metals and other industries, heat insulation fireproof material

Requirements for high temperature or open fire in the smoke and fire-free special use of the environment

Five significant advantages description:

1. Thickness 3mm-200mm, one time molding:

Conventional organic fiberboard conventional size 10-60mm, too thin board without strength, easy to break; too thick board dry impermeable, easy to mold and deformation, the formation of "cotton core".

Calcination-free inorganic board, with its high density and easy to dry characteristics, to ensure the high quality of fiberboard on the basis of extremely thin and thick without deformation.

2. Extremely low organic content, <1.45

Traditional organic fiberboard, organic content of 7-9%, easy to absorb moisture mold, high temperature fire smoke.

Calcination-free inorganic board adopts high-quality inorganic glue to achieve very low organic content, to avoid the use of fiberboard in the smoke and fire problems.

3. No calcination, no smoke, no odor, no discoloration at high temperature.

Traditional organic board to achieve high temperature smoke-free and colorless state, must be made into a finished product, the second calcination and dip glue again, the organic content is still very high, and the internal strength of fiberboard can not be guaranteed.

Calcination-free inorganic board because of its high-quality inorganic glue formula, without the need for secondary calcination, a molding, truly smoke-free, tasteless and colorless.

4. High strength, can do any carving

Traditional organic board due to the characteristics of silica sol, can not be molded once the high-density fiberboard, must be made into a finished product, again dip glue, fiberboard internal strength can not be guaranteed.

Calcination-free inorganic boards can be molded in one go to achieve a density of 400 and above. The internal and external strength is consistent, and can be carved into any desired shape.

5. No mold, no waste water, environmental protection and energy saving

Traditional organic board production uses starch, easy to mold; produced by the waste water, the environment caused by unavoidable pollution.

Calcination-free inorganic board production will not produce wastewater, recycling, truly energy-saving and environmentally friendly, contributing to the progress of mankind.

Technical parameters: